For sheet metal fabricators
From the flat pattern to a price, nest, cut, bend and coat.
Upload the DXF and the thickness. Feevion Parts nests the part on your sheet sizes, times the cut from its length and pierces, adds the bends at your press brake rate and the powder coat by area, and puts it all on a quote.
- Weight and both-sides area from a DXF flat pattern and a thickness
- Nesting on your own sheet sizes, with margin and gap; charge whole sheets or only the share used
- Laser, plasma or waterjet time from the cut length at your speed, plus each pierce, at the machine’s rate
- Press brake time from the number of bends
- Powder coat and paint by area, per part or per load, with masking and minimums
- Solid parts too, from STEP, IGES, STL, OBJ or 3MF
- Quotes with several parts, extra lines and tax, accepted online
Sound familiar?
Sheets, not parts
Material is bought by the sheet, so the price per part depends on how many fit, which is slow to work out by hand.
Cut time from memory
Laser time depends on the cut length and the number of pierces; estimating it by eye makes busy parts too cheap.
Coating as an afterthought
Powder coat priced per piece without the real area undercharges the big flat parts.
How it works
- Upload the DXF. Closed outlines and the thickness; pick the material and your sheet size.
- Add cutting, bending and coating. Your machines and rates are set once. Feevion fills in the time and the cost.
- Send the quote. The customer opens a link, accepts, and you see it straight away.
Questions
Is the nesting a true nest?
It is a quick rectangular nest for quoting: parts in rows, all turned the same way, whichever way fits more. Your nesting software will usually fit a few more; the quote stays on the safe side.
Can I set my own cutting speeds?
Yes, per estimate: the cutting speed, the time per pierce and the machine’s hourly rate.
Does it read bends from the DXF?
No. You enter the number of bends and the time each takes; Feevion prices them at your press brake rate.