For powder coating shops
Price powder coat on the area you actually spray.
Feevion Parts measures the part from the customer’s model or flat pattern, works out how many fit your oven or line, and prices the coat by area, per part or per load, with masking, lot fees and minimums, then sends a quote the customer accepts online.
- Surface area from STEP, IGES, STL, OBJ or 3MF models, and both sides of a DXF flat pattern
- Your ovens and lines: parts per load from their size and weight limit
- Coatings priced by area (ft² or m²), per part, by weight or per load at the line’s hourly rate
- Masking, racking and inspection per part; a lot fee per order; a minimum per finish
- Several coats on one part, such as blast, primer and topcoat
- A part library for repeat customers, with every price you quoted
- Quotes accepted online, with an optional deposit paid by card or bank
Sound familiar?
Per-piece prices that don’t fit
A big flat panel and a small bracket get the same price per piece, and the big parts lose money.
Oven space is the real cost
How many parts fit a load decides the price, but it is usually guessed at the counter.
Masking left out
Plugging holes and taping threads takes real time that never shows on the quote.
How it works
- Upload the file. A STEP model, a DXF with its thickness, or a drawing with the sizes typed in.
- Pick the coat and oven. Your coatings, ovens and rates are set once. Feevion fills the load and prices it.
- Send the quote. The customer accepts from a link, and can pay a deposit when they do.
Questions
Does it count both sides of a sheet metal part?
Yes. From a DXF and a thickness it counts both faces and the edges; from a 3D model it counts every face.
Can I price some jobs per piece?
Yes. Each finish can be priced by area, per part, by weight or per load, and every estimate keeps its own rates.
Is there a free way to check an area first?
Yes. Feevion’s free part surface area calculator works out simple plates, bars and tubes, with holes.