For anodizing shops
Quote anodizing on the real surface area, not the print.
Feevion Parts reads the customer’s model and gives the area you actually anodize, bores and pockets included, and how many parts fit your tank or rack. Price by area, per part or per load, add racking, masking and your lot fee, and send a quote the customer accepts online.
- Total surface area from STEP, IGES, STL, OBJ or 3MF: outside, inside, edges and every hole wall
- Your tanks and racks: parts per load from their size, clearance and weight limit
- Finishes priced by area (ft² or m²), per part, by weight or per load at the line’s hourly rate
- Racking, masking and inspection per part; a lot fee per order; a minimum charge per finish
- Several steps on one part, such as strip, anodize and seal
- A part library for repeat jobs, with certificates and every price you quoted
- Quotes accepted online, with an optional deposit paid by card or bank
Sound familiar?
Area from a print
Working out square inches from a drawing misses bores, slots and edges, and on small parts that is most of the area.
Racking eats the margin
Every part has to be racked and many need masking, but the time per part rarely makes it into the price.
Small lots, same tank time
A ten-piece order runs a full cycle. Without a lot fee or minimum, it costs more to run than it brings in.
How it works
- Upload the customer’s file. The STEP or other model gives the exact area. A drawing works too: type in the sizes.
- Pick the finish and tank. Your finishes, tanks and rates are set once. Feevion fills the load and prices the order.
- Send the quote. The customer opens a link, accepts, and you see it straight away.
Questions
Does it work for Type II and hard coat?
Yes. Set each up as its own finish with its own rate, minimum and tank, and pick the one the customer asked for.
Can I charge for masking?
Yes. Masking, racking and inspection are each a time or price per part on the estimate.
What if the customer only sends a drawing?
Upload the PDF, scan or photo, pick the basic shape and type in its sizes. You can have the AI read the drawing too, as an extra.